Introduction
The neck of the scapula is the zone that connects the glenoid (scapula head) to the scapula body. The length, alignment, and angulation of the scapula neck are critical for shoulder function and rotator cuff movements [
1]. Because of the rarity of these fractures, there have been substantial conflicts and, in some cases, inconsistencies in the precise classification and definition of these fractures [
2]. The scapula anatomical neck is identified as the constricted zone that encircles the glenoid cavity laterally, extending from the glenoid fossa to the coracoid process, whereas the surgical neck is located medially to the coracoid process and is more prone to fracture following traumatic events [
3].
Scapular fractures account for only 1% of all body fractures, and 7% of those are scapular neck fractures [
4,
5]. The majority of these fractures are caused by high-energy trauma, such as motor vehicle collisions or falls from height. Studies have shown that in 80–95% of cases, patients present with concomitant injuries, particularly thoracic injuries, which require immediate attention and management. Prioritizing the stabilization and treatment of associated injuries may necessitate a delay in the surgical intervention for the scapular fracture [
6]. Scapular neck, also mentioned as glenoid neck fractures, are categorized into three types: anatomical neck fractures (ANFs), surgical neck fractures, and trans-spinous fractures [
5,
7].
Although there have been several reports of this particular type of fracture in the existing literature, reliable radiological evidence to support some of these claims is limited. Through an extensive literature search, our investigation yielded a limited number of radiologically confirmed cases of scapula ANF. To date, only seven such cases have been documented in the available literature [
3,
5,
7‐
10]. Remarkably, among these cases, only one case underwent delayed surgery, highlighting the scarcity of evidence pertaining to the optimal management approach for this fracture pattern [
9]. In this study, we aim to introduce a rare case of concurrent scapular anatomical neck fracture and humeral greater tubercle avulsion fracture, which was complicated by a referral delay of 6 weeks and a high body mass index (BMI). We also discuss the clinical presentation, diagnostic assessment, surgical management, and postoperative outcomes of this scapula anatomical neck fracture. In addition, we review previous case reports of scapular anatomical neck fractures to provide comprehensive evidence to guide the diagnosis, classification, and treatment of scapula anatomical neck fractures.
Discussion
The management of scapula ANFs presents unique challenges, particularly in cases involving morbidly obese patients. In this case report, we outlined our proposed surgical approach, yielding acceptable postoperative outcomes, for a 34-year-old male patient with morbid obesity who experienced an anatomical neck fracture of the scapula following a motor vehicle accident. The delay in surgical intervention due to concurrent life-threatening injuries emphasizes the importance of a multidisciplinary approach and careful consideration of the patient’s overall condition. The utilization of the posterolateral limited Dupont–Evrard approach allowed for adequate exposure and stable fixation of the fracture, taking into account the patient’s high body mass index. Through this case, we contribute to the existing body of literature on scapula neck fractures, highlighting the rarity of radiologically confirmed scapula anatomical neck fractures and the limited evidence regarding their optimal management.
Scapular neck fractures have been the subject of classification systems developed over the years to better understand their anatomical characteristics and guide treatment decisions. In 1913, two types of classifications were presented for scapular neck fractures. Tanton
et al. categorized scapular neck fractures into three subtypes: anatomical, surgical, and trans-spinous. Similarly, Ada and Miller introduced a classification system in which scapular neck fractures were divided into three types: IIA (surgical neck), IIB (trans-spinous neck), and IIC (infraspinous neck fracture) [
14,
15]. These early classifications provided a basic framework for distinguishing between different types of scapular neck fractures.
In 1984, Gagey
et al. introduced an anatomical classification system for scapular neck fractures, further refining the understanding of these fractures. This classification divided scapular neck fractures into three categories: anatomical neck fracture, surgical neck fracture, and trans-spinous fracture [
16]. Building upon the work of Gagey
et al. and Euler
et al. another classification system for scapular neck fractures was proposed in 1992. This system classified scapular neck fractures into three categories: C1 (anatomical neck fractures), C2 (surgical neck fractures), and C3 [surgical neck fractures with disrupted superior shoulder suspensory complex (SSSC)] [
17]. This classification system took into account the involvement of the SSSC, adding another dimension to the understanding of scapular neck fractures. In 1994 Goss
et al. introduced a classification system that also included anatomical neck fractures, surgical neck fractures, and infraspinous neck fractures [
2]. This classification system distinguished between scapula neck fractures occurring above or below the level of the spine of the scapula. Since the connection between the glenoid fossa and scapular body in the infraspinatus type was intact, we believe this type is a scapular body fracture.
According to the previous studies, the definition of anatomical neck fractures of the scapula in our case aligns with the definition provided by Bartoníček
et al. [
5]. ANFs are characterized by an intact glenoid fossa, with the fracture line extending superiorly to the lateral base of the coracoid while keeping a short inferior spike of the scapular lateral pillar, in less than approximately 4 cm distal to the inferior glenoid pole.
Scapula ANFs are of particular importance due to their tendency toward instability and distinct radiological features that differentiate them from other scapular fractures. Due to the coracoid separation, the only tendon attached to the anatomical neck of scapula is the long head of the triceps brachii, which causes instability of the fragment and increases the GPA [
3,
7]. Unlike scapular surgical neck fractures, where the integrity of the SSSC plays a crucial role in the fracture stability, owing to the coracoid’s attachment to the broken piece, in coracoclavicular ligament rupture cases, the fracture becomes even more unstable resulting in reduced GPA, due to the traction exerted by the conjoined tendon, which acts as a strong deforming force [
7,
18].
Another challenge associated with scapula ANFs is the small size of the fractured fragment which poses difficulties in achieving stable fixation [
2]. This may explain the utilization of various implants reported in previous studies, as surgeons try to find the most appropriate fixation method to address the unique characteristics of these fractures.
To date, the literature on radiologically verified scapular neck fractures remains scarce, with only seven reported cases (Table
1). In 1984 Hardegger
et al. conducted a study involving 37 patients with scapular fractures requiring fixation, two of which were diagnosed with ANFs [
7]. The first case was a 44-year-old male patient whose fracture was managed through the placement of two lag screws. One screw was inserted obliquely from the spine of the scapula to the infraglenoid tubercle, while the second screw protected the inferior tip of the fragment. The second patient, a 24-year-old male, underwent surgery with three screws and one plate. In both cases, the surgical approach employed was the posterior approach through the intermuscular plane of the infraspinatus and teres minor muscles. Following surgery, the postoperative protocol involved immobilization of the patient’s shoulder for 3–5 days, followed by functional rehabilitation. After the follow-up period, both patients were able to resume their ordinary activities without any impairment.
Table 1
Characteristics of all eight reported cases of scapula anatomical neck fracture
1 | 44 | Increased | Judet | Two lag screws |
2 | 24 | Increased | Judet | Three lag screws + one buttress plate |
3 | 33 | NR | Judet | 3.5 mm T-plate |
4 | NR | Increased | Judet | Two 3.5 mm plates |
5 | 49 | Increased | Judet | 3.5 mm L-plate + wire loops |
6 | 51 | Increased | Judet | T + straight 3.5 mm plates |
7 | 51 | Unchanged | Posterior deltoid splitting | Two wires |
8 (Our case) | 34 | Increased (73.9°) | Posterolateral limited Dupont-Evrard | 3.5 mm T + reconstruction plates |
In 1999, Arts
et al. reported a case of anatomical scapular neck fracture in a 33-year-old man with significant anterior angulation. They fixed the fracture with a 3.5 mm T-plate to the spine of the scapula. Postoperative functional rehabilitation after the operation started with limitation in external rotation and, 3 months after the injury, the patient returned to work without experiencing any symptoms. The authors stated that the concept of floating shoulder as an indication for surgery in scapular neck fractures is limited to specific surgical types, and anatomical neck fractures are inherently unstable, even in the presence of intact clavicle and coracoclavicular ligaments [
8].
The fourth scapular anatomical neck fracture was reported by Jeong GK
et al. in 2005, which was successfully managed by two 3.5 mm plates via the posterior Judet approach [
10]. Subsequently, Bartoníček
et al. reported two cases of this rare fracture in 2013, both resulting from falling from height [
3]. The first case was a 49-year-old man, operated with one 3.5 mm plate and wire loops via the Judet approach. Passive movements began immediately after the surgery, followed by the commencement of active movements 6 weeks later. The patient achieved a complete recovery. The second patient was a 51-year-old female with a simultaneous scapular anatomical neck fracture, long head of biceps, and superior labrum avulsion. The fracture was fixed with two plates, one aligned along the lateral border and the other along the spine of the scapula. After 4 weeks of immobilization, rehabilitation was started and the outcome was considered fair with a constant score of 50.
The seventh reported case of scapular anatomical neck fracture was presented by Ogawa
et al. in 2018 [
9], in which a 51-year-old man with a scapular anatomical neck, spine of the scapula, and coracoid process fractures along with acromioclavicular joint subluxation, was operated on with a 7 week delay. The fracture of the scapular spine was stabilized using a reconstruction plate, while the anatomical neck fracture was fixed with two wires. The coracoid fracture remained intact, as it did not exhibit any displacement. Passive movements were started 4 days after the operation, followed by active movements and physical therapy at 5 weeks and 2 months later, respectively. At the 6 month follow-up, the patient demonstrated favorable shoulder movements, with only local tenderness around the plate and mild muscle weakness evident.
To date, various studies reported scapular anatomical neck fractures, but none of them presented radiological evidence of those fractures [
9]. According to the anatomical complexity of the scapula, the classification of these fractures should be done based on the findings of the computed tomography scan with three-dimensional reconstruction [
5,
19]. A vertical upper fracture line lateral to the coracoid process and a small lower spike are the typical radiological characteristics of ANF. The glenoid fossa is completely separated from the scapula body and coracoid process. Thus, the only tendon attached to the glenoid is the long head of the triceps that is attached to the infraglenoid tubercle. The importance of this issue lies in explaining the instability of these fractures and their radiological features [
8]. In our opinion, fractures extending more than 5 cm distal to the infraglenoid tubercle are classified as scapular body fractures, and fractures extending medially to the base of the coracoid are classified as surgical neck fractures [
5]. In these types of fractures, additional attachments contribute to the stability of the fracture, such as the teres minor muscle in fractures with long spikes, or coracoclavicular ligament in surgical neck fractures. True scapular anatomic neck fractures typically share the same distal displacement, valgus misalignment, and increased GPA [
5].
Due to the unstable nature of ANFs [
8], surgery is almost always required to achieve an acceptable reduction, but nonsurgical treatment is an option as suggested by Jan Bartonícˇek for fractures with displacement of less than 1 cm and GPAs between 26° and 55° [
5]. Another significant difference between anatomical neck fractures of the scapula and other types is the smaller size of the broken piece, which makes its stabilization more challenging. Various methods such as plate and wire loops or a combination of them have been used to fix these fractures. Based on our review of the literature and the challenges associated with scapular anatomical neck fractures, we propose the use of a stable fixation technique with a plate that allows for early postoperative movements. However, the small size of the glenoid can pose difficulties in achieving optimal fixation. To overcome this challenge, we recommend using scapula lateral border anatomical plates whenever possible. These plates are specifically designed to provide secure fixation in scapular fractures, including anatomical neck fractures. In cases where scapula lateral body plates are not available, alternative options such as a distal humeral Y-type plate or 3.5 mm T-, L-, or precountered reconstruction plates are recommended to place at least three screws into the glenoid fragment and ensure stable fixation.
Another significant challenge we encountered in the treatment of this patient was the delay in fracture surgery. Since scapular fractures, which are displaced to such a degree that surgery is unavoidable, are often caused by high-energy trauma events, it is highly frequent to have injuries to important organs, notably the chest. In such cases, the priority becomes addressing and stabilizing life-threatening conditions, thereby necessitating a delay in the surgical treatment of scapular fractures until the overall condition of the patient improves. On the other hand, due to the fact that the surgical indications of scapula fractures are relatively limited and it is not a familiar procedure for many surgeons, generally these fractures are referred to another facility for treatment, which itself leads to further delays in initiating appropriate management. It is important to note that treatment delays of more than 3 weeks after the initial trauma are considered delayed because scapula fractures exhibit a rapid healing process owing to the well-vascularized muscular envelope surrounding the scapula [
20]. Therefore, delayed scapular fracture fixation presents a demanding operation due to the accelerated union rate and soft tissue contraction that occurs during the healing process. In rare situations, even after calluses removal and osteoclasis, achieving anatomical reduction is extremely unlikely due to muscle spasm affecting the fracture fragments. Based on our experience from this case, we highlight the importance of meticulous reduction verification using fluoroscopy to ensure appropriate correction of the glenopolar angle and medialization. This is particularly crucial in the context of delayed surgical intervention for scapular fractures, as achieving anatomical reduction poses challenges, primarily due to the presence of blunt fracture edges.
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.