Sella turcica variations in patients with transverse skeletal discrepancies versus patients with normal transverse relationships. a cross- sectional study

The morphology and dimensions of the sella turcica (ST) and its relation to various malocclusions and syndromes have always been an area of discussion [1, 2]. ST is clearly seen on lateral cephalograms which are routinely requested for orthodontic diagnosis and treatment planning. The ST, or the pituitary fossa, is a saddle shaped bony depression found in the center of the sphenoid bone that houses the pituitary gland. It is bounded by anterior and posterior walls of different embryonic origins. Growth hormone is secreted from the anterior lobe of the pituitary gland. It is known that the growth hormone greatly affects the craniofacial growth through stimulating endochondral ossification and sutural growth [3]. Endochondral bone formation plays a major role in the growth of the cranial base. The sphenoethmoidal, interethmoidal synchondroses and the nasal cartilage are responsible for the transverse, anterior and vertical growth of the maxilla early in life till the age of 6 years. Studies have found that the younger the children at the start of growth hormone treatment (if needed), the greater the residual growth potential and the greater the effect on craniofacial growth [4, 5].

The posterior wall or the dorsum sellae develops from the para-axial mesoderm which is greatly influenced by the notochord. The anterior wall or the tuberculum sellae develops from the neural crest cells [6, 7]. It was found that anomalies or malformations of the posterior wall were associated with brain alterations while malformations of the anterior wall were associated with abnormalities in the frontonasal and maxillary regions [6, 8]. Due to its close correlation to the pituitary gland, variations in the size of the ST may reflect the presence of hormonal imbalance as hyperprolactinemia [9], pituitary adenoma [10] and Williams syndrome [11]. When the size of ST was compared to different sagittal skeletal patterns, a larger size was seen in skeletal Class III subjects while smaller diameter was present in Class II subjects [12]. The diameter and depth of the ST were found to be similar among class I, class II division 1 and class II division 2 subjects yet class II division 2 subjects showed a smaller ST length [13].

Two anterior and two posterior clinoid processes enclose the pituitary fossa. Variations in morphology in the form of fusion of these processes and ossification in the interclinoid ligament can be seen in 3–13% ² of normal populations and is known as sella turcica bridging (STB). Higher incidence of STB was reported in Class III skeletal patterns ^{[[1], [14‐17]]}, dental anomalies [17], transpositions [18] and canine impaction cases [19].

Unfortunately, 3 dimensional (3D) studies tackling the ST morphology among different genders, races and malocclusions are scarce in the literature and instead, most of our knowledge is derived from measurements performed on 2 dimensional lateral cephalometric measurements. Nevertheless, information correlating transverse malocclusions and ST morphology is unclear. Therefore, the aim of this study was to assess and compare the morphology and incidence of bridging of the ST 3- dimensionally in patients with skeletal transverse maxillary deficiency and orthodontic patients with normal transverse relationships.

In this retrospective cross-sectional study, the sample consisted of 52 cone beam computed tomographic (CBCT) scans of patients who received their treatment in the Department of Orthodontics, Faculty of Oral and Dental Medicine, Cairo University. The study comprised two groups, group I included CBCT images of 26 adult patients (6 males, 20 females) previously diagnosed with a skeletal maxillary constriction. All the samples in group I showed a maxilla-mandibular differential index of 5 mm or more [20]. Group II comprised CBCT images of 26 orthodontic patients (8 males, 18 females) with normal transverse skeletal relationships. For both groups, the inclusion criteria were: medically free adults (age range 18–30 years) of both sexes, Skeletal class 1 (ANB angle = 0–4⁰), have no dental anomalies or impactions, non- syndromic, with no facial deformities and not subjected to previous head traumas or surgeries (Table 1). The study was approved by the Research Ethics Committee of the Faculty of Oral and Dental Medicine, Cairo University (reference number: 35-9-22).

Despite the mean values of the sellar length, depth and diameter of group I were generally higher than those of group II, no statistically significant differences were detected among the two groups in any of the sellar dimensions measurements (Table 2).

For evaluation of the inter-observer reliability of sellar dimensions in both groups, the ICC was calculated and revealed excellent agreement in all the 3 measurements with a range of 0.94 to 0.99 (Table 3).

On correlating both groups to STB, 92.3% of group I patients showed no bridging (class I), 7.7% showed partial bridging (class II), and no cases showed complete bridging (class III) in either of the groups (Fig. 3).

The incidence of class II bridging was higher in group II recording 26.9% (Table 4). Rounded ST shape (Fig. 4) was found to be the highest among the two groups while the flat was the lowest (Table 4). The oval shape was significantly higher in Group II patients recording 34.18% (Fig. 5).

Cephalometric radiographs deliver countless diagnostic information to orthodontists before commencing, during and after the orthodontic treatment. The S point is a crucial landmark used in many cephalometric analyses [25, 26]. Moreover, the anterior wall of the ST is considered as one of the important anatomical references used in describing craniofacial patterns [27], superimpositions and growth prediction, taking into account that no further growth changes affect the sella after the age of 15 years [28‐30].

Numerous studies have correlated between ST morphology and dental anomalies, craniofacial deviations as well as different skeletal abnormalities in the sagittal plane. Limited studies have correlated between the morphological variations and the above-mentioned deviations 3 dimensionally. Using lateral cephalograms, many studies reported an increase in the STB (whether partial or complete) in cases with palatal canine impactions and teeth transpositions [17], [31‐33]. These studies also postulated that the early appearance of STB shouldn’t be overlooked as it may be an indication to future teeth anomalies. Investigating the same correlation using CBCT images, Ortiz et al. [34] negated the presence of any significant association between STB and palatal impacted canines despite reporting the occurrence of STB in 59% in the palatal impacted canine group compared to 50% occurrence in samples with no impactions.

When the shape and size of the ST were evaluated 3- dimensionally in non-syndromic cleft lip and palate patients using CBCT images [23], cleft patients appeared to have a more flattened and shorter sella compared to the non-cleft patients. These findings partially coincide with the results of Alkofide [2] who analyzed the morphology of ST using lateral cephalograms of 95 cleft patients and 190 non- cleft individuals and reported a decrease in its size in cleft subjects. In a similar 2-dimensional study, Alam and Alfawzan [35] also reported a decrease in ST dimension in cleft patients especially those with bilateral cleft lip and palate. Results of the current study revealed that most of the patients in both study groups had a rounded shape ST 59.6%. These findings agree with those of Yasa et al. [23] who reported the rounded shape ST to be the most prevalent (71.8%) among their sample.

In this study, the oval shaped ST was found in only 34.18% patients of group II and yet that was significantly higher than group I.

Lateral cephalograms were also used to correlate morphological changes of ST with different anteroposterior skeletal relationships and the results were controversial. Some studies ^{[[9], [36‐38]]} reported an increase in the linear dimensions of the ST in skeletal Class 3 compared to skeletal class 1 and class 2 while other studies [13, 36] found no significant differences in the size of the ST in the three sagittal skeletal variations. This may be due to the different ethnic background of the samples collected in these studies in addition to the unavoidable limitations of the lateral cephalograms as a 2-dimensional diagnostic tool in terms of superimposition and projection errors [40].

When it comes to malocclusions in the transverse dimension, this is the first study to correlate ST morphology and bridging and malocclusion in the transverse plane 3 dimensionally. The current study results showed increased ST linear dimension with mean length, depth and diameter of 11.09 ± 1.79, 8.56 ± 1.69 and 12.81 ± 1.34 mm in patients with transverse maxillary deficiency versus 10.34 ± 1.44, 8.24 ± 1.21, 12.38 ± 1.41 mm in orthodontic patients with normal transverse skeletal relationships with no statistically significant differences between the two groups. Hence, no correlation was found between sellar length, depth or diameter and transverse maxillary deficiency. These results partly resemble those reported by Deniz and Arslan [41] who reported a significant increase in ST length and depth in transverse maxillary deficient patients. In their study, the length and depth of the ST were less than the values reported in the current study (8.91 ± 1.73 and 7.45 ± 1.29 mm in transverse maxillary deficient patients and 8.23 ± 1.97 and 7.24 ± 1.59 mm in normal orthodontic patients). Using CBCT scans in the current study permitted viewing the ST anatomy clearly with no superimpositions of surrounding structures. This in turn aided in assessing the degree of fusion between the anterior and posterior clinoid processes in both groups avoiding interpretation of false or pseudo bridging results.

Different bridging percentages were reported 4.83% ¹³, 9.9% ¹⁷ and 11.67% ¹² with results fluctuating between insignificant differences among different skeletal classes [12] and strong correlation of bridging and skeletal class 3 malocclusion [23]. In the midst of this dilemma, Chou et al. [42] reported no significant differences in ST size or bridging percentages measured 3- dimensionally on CBCT images among different sagittal skeletal patterns in a sample of Taiwanese population. Likewise, our results revealed the absence of any correlation between STB and malocclusion in the transverse plane. On the contrary, Deniz and Arslan [41] in their 2-dimensional study on lateral cephalograms reported a higher incidence of bridging in patients with transverse maxillary deficiency. This could be attributed to using lateral cephalograms in assessing the ST morphology and measuring bridging visually (using Axelsson et al. [43] classification) rather than using precise calculations.

In the present study, both genders were included and females comprised the majority of the samples. Yet some studies reported no differences in sellar morphology between adult males and females [2, 12], other studies revealed that gender was significantly correlated with the dimensions and shape of the ST [41, 44]. Hence, results of this study should be interpreted with caution. Besides nourishing the forensic data, results of the current study could share in the diagnostic process and information regarding transverse maxillary deficiencies. Although CBCT images were used, the references that were followed to assess ST morphology and bridging were originally drawn from measurements and norms on lateral cephalograms due to the lack of references established 3 dimensionally. This limitation should be taken into consideration to develop future 3D norms to aid in sorting and classifying the sellar morphology and degree of bridging. Being extracted from Egyptian population data, results of this study shouldn’t be compared to measurements of populations of different ethnic or genetic backgrounds.

Within the limitations of the current study, no correlation was found between neither sellar size nor shape and transverse maxillary deficiency. Furthermore, sella turcica bridging was not associated with malocclusions in the transverse plane. Occurrence of oval shaped sella turcica was significantly greater in patients with normal transverse relationships.